Deck Builder Asheville NC offers many options for railing, from wrought iron to glass. For your deck, the style you choose should complement the style of your home and the surrounding landscape. Wood is the most traditional choice and allows for a wide variety of design options. It is also the cheapest option for railing, but it requires regular maintenance. If you have a long deck, wood can rot or be damaged by insects. Other materials can also be used, including aluminum or glass.


A metal railing is made of steel, aluminum, or iron. These materials can be powder-coated, which protects them from corrosion and UV rays. However, the downside is that they can be expensive to maintain and require extra maintenance. In addition, the metal balusters are slimmer and will require more maintenance. Luckily, some composite materials can be used to build a stylish and durable railing that requires minimal upkeep. These materials are also scratch, insect, and weather-resistant, so they should be a great choice.
When building a wooden deck railing, you should take note of the requirements of your local code. In general, the International Building Code (IBC) regulates decks and other structures, and deck railings are tested for construction adequacy in different communities. Safety should be your first priority, whether you have a single-family home or a multi-family property. In order to ensure your deck railing is safe and meets the building code, be sure to consult your local permitting office.
The state’s building code governs the height of a railing. These regulations determine the height and spacing of the posts. If you do not follow these regulations, you could face a fine. A violation of the code may cause your deck to fail inspection. A simple visit to the state division of building standards will confirm that your deck assembly meets the requirements. If it does, you can be assured that your new railing will be safe and secure.
The height of a railing should meet the code. A typical deck railing system will have two rails between each pair of posts. The height of a railing should be at least 50 inches above the floor. If you want to install a railing on a raised porch, the spacing between posts should be a little larger than the height of the railing. You can add additional rails between the posts when you have a balcony to make it more secure.
The height of a deck is the primary factor for determining whether or not it needs a railing. Depending on the type of deck, the height of the railing should be at least 36 inches from the floor. The height of the railing is important because it can also fall and cause injuries. The height of a railing depends on the posts. When it is not anchored, the pressure from the ground may be able to push the railing off of the post.
The height of the railing must be within the code of the city. It should be at least 36 inches from the floor and four feet above the top rail. The bottom and top rails should be spaced at least four inches apart. The top and bottom rails should be level with the floor, but the rim joists can be the weakest link in the system. Therefore, it is important to reinforce the rim joists when installing a deck railing.
Besides being safe, the top of a deck railing is also important because it will prevent falls. A deck railing should have a hefty weight capacity. The top of a fence should be able to hold up to 200 pounds of pressure. The deck railing is one of the most important parts of your house. If you have a high level of safety, it will be safer to prevent accidents. This should not be a problem.
Posts can be attached to the deck railing. Some builders also bevel the top of the posts, which will prevent sharp edges. For a deck, the width of the railing should be at least seventy inches. It should also be installed between the straight sections of the deck, which makes it easier for children to climb up. In addition, the height of a railing should be no less than 36 inches (914 mm).